JOVANT 20V Cordless 2-in-1 Brad Nailer & Stapler with 2 Batteries & Nails

[PTJ-011-02]  

• 【2 IN 1 Cordless Brad Nailer】2-in-1 electric nail gun/stapler drives a range of 18 gauge brad nails from 3/4"~2", and 7/32" crown staple from 3/4"~1-5/8". which makes the electric nailer/stapler ideal for heavy duty remodeling work that involves installing thick baseboards or large door and window case molding.
• 【Single Firing & Contact Firing】Easily alternate the working modes by the switch on the side, which means you can fire a single brad with each trigger squeeze or a series of nails up to 90 nails/min. 
  
• 【Tool-Free Depth Adjustment】Easily adjust the knob in the direction of "+", the impact will get stronger while adjusting, It is typically recommended to use nails that are approximately three times longer than the thickness of the workpiece being fastened.
  
• 【Dual LED Lights & Intelligent Indicator】With front-positioned dual LED lights, the nail gun battery can illuminate the work area and get the job done even in dim or dusty areas. Moreover, the build-on error light indicator on the side of the electric nail gun trouble-shoot effectively when errors are incurred
• 【Easy Nail Jam Troubleshooting Design】Easily use the wrench inclued in the package to remove the cover plate to clean the nail jam if occurred.
• 【12" Nail Puller】Our cordless nail gun is equipped with a nail puller. The 12-Inch Nail Puller have dual strike zones for rapid nail extraction, precision-honed claws remove embedded or headless nails with minimal damage.The angled chisel end ensure ease of use when prying and lifting.
• 【PACKAGE CONTENT】: Including cordless nailer x 1, 2.0Ah Lithium-ion Battery x 2, charger x 1, nail puller x 1, Ear Plug x 1，Safety Goggles x 1, M3 Hex Wrench x 1, Brad Nails x 1280, Staples x 960, Carrying Case x 1 and a user manual.
• 【Attention】
  1. Always ensure the tool is pointed away from you when adjusting the depth
  2. Remember to take out the battery before reloading the magazine or clearing a nail jam.
  3. Do not try to use brads shorter than your nail gun’s recommended range! While they may fit the tool, they are likely to get jammed at the power tip.
  4. 2.Do not try to load your brad nailer with finish nails, which are usually 15 or 16-gauge fasteners, and should be much thicker. Even if they are short enough, finish nails are too thick to feed through a brad nailer.
• 【Warranty & After-service】
   30-day No-hassle Returns
   12 Months Warranty

JOVANT - 20V 50MM Cordless Brad Nail Gun with 2pcs Batteries & 2240pcs Nails