If you've landed on JOVANT's cordless telescoping pole angle grinder, you'll notice two listings that look almost identical. Same 20V brushless motor, same 5.3–9.3 ft telescoping pole, same 180° pivoting head, same dual 4.0Ah batteries. The only real difference is what comes in the box: one kit ships with cutting wheels and wire brushes for metal work, the other with a marble cutting and grinding wheel for stone work. This guide walks through what each kit actually handles so you order the right one the first time.
At a Glance
|
Spec |
Detail |
|
|
Motor |
20V Max brushless, 4-speed, up to 8500 RPM |
|
|
Arbor |
5/8" |
|
|
Pole |
5.3 ft to 9.3 ft telescoping, up to 15.3 ft reach |
|
|
Head |
180° pivoting |
|
|
Maximum Speed |
8500RPM |
|
|
Batteries |
2 × 20V Max 4.0Ah |
|
|
Metal kit includes |
5 cutting wheels + 4 wire wheel brushes |
|
|
Stone kit includes |
1 marble cutting wheel + 1 marble grinding wheel |
|
What the Tool Actually Is
A telescoping pole angle grinder is a standard 5/8" cordless angle grinder that detaches from an extension pole. Off the pole, it's a handheld grinder for bench or low work. On the pole, it reaches 15+ feet overhead so you can cut or grind steel beams, fence posts, wall tiles, or marble slabs from the ground — no ladder, no bending under foot-level stone. The 180° head lets you tilt the disc to match the work angle rather than twisting your whole body.
The Metal/Rust Kit
The metal kit is built for steel and general demolition work. The five cutting wheels handle rebar, angle iron, thin-wall steel, and tile. The four wire wheel brushes are the real differentiator: they strip rust, old paint, mill scale, and light corrosion off metal surfaces — fence rails, trailer frames, patio furniture, wrought-iron railings — without the fine dust a flap disc throws.
This is the kit to reach for if your jobs are mostly: cutting through thin steel members at height (like overhead carport framing), cleaning up welded joints, restoring a rusty metal gate, or trimming tile backsplashes on a wall. The variable speed matters here: lower RPMs for wire brushing (less chance of burning through thin paint), higher RPMs for clean steel cuts.


The metal kit's cut-off wheel easily slices through 3/8-inch rebar clamped in a vise
The Stone/Marble Kit
The stone kit trades the wire brushes and extra cutting wheels for two purpose-built discs: one for cutting marble and natural stone, one for grinding and smoothing stone edges. Ordinary steel cutting wheels will chip or glaze on marble, and wire brushes do nothing on stone. The dedicated marble wheels are formulated to cut limestone, granite tile, and cultured marble without the ugly veining and blowouts a general-purpose disc causes.
Choose this kit if your project is a stone patio cleanup, cutting marble threshold strips, grinding out a damaged travertine tile, or smoothing the edge of a granite slab after install. The long pole matters most here: working on a standing stone wall or a vertical marble surface from the ground beats kneeling on the floor holding a handheld grinder.


Why the Telescoping Pole Matters
The pole isn't just a long handle — it changes how you work:
- No ladder for overhead cuts. Running a spinning angle grinder on a ladder is a real fall risk; standing on the ground with the tool extended keeps both feet under you.
- One length for high and low work. Collapsed to 5.3 ft, you grind at waist height without bending your back; extended to 9.3 ft, you reach the underside of carport beams or the top of a stone wall.
- 180° pivoting head. Tilt the disc to match the surface instead of twisting your spine — useful for vertical wall grinding or cutting along an overhead angle.
The head detaches in seconds, so you're not stuck carrying a long pole for bench or floor work.
Which One Fits Your Job?
Choose the metal/rust kit if most of your to-do list involves rust, paint, or steel — fence refurbishment, carport welding cleanup, metal gate restoration.
Choose the stone/marble kit if your work is marble, granite, or natural stone — patio tile cuts, threshold trimming, edge grinding.
Not for either kit: heavy commercial fabrication, cutting steel thicker than roughly 3/8 inch, or daily professional construction use. This is a homeowner and serious DIY tool. If you regularly cut thick rebar or run a shop, a full-size dedicated grinder will serve you better. And if you genuinely do both metal and stone work around the property, you don't need two tools — the grinder head detaches, so start with whichever kit matches your current job, then add the other set of wheels later.
FAQ
1.Can I use the stone wheels on the metal kit, or vice versa?
Yes. The arbor is a standard 5/8", so any 4–4.5" wheel fitting a 5/8" arbor works on this tool regardless of which kit you bought. The kits are just bundled wheel sets; the grinder body is identical.
2.How high can I actually reach?
The pole extends to 9.3 ft, and with a typical adult arm overhead, the advertised max reach is about 15.3 ft. That covers single-story eaves, fence-line steel, and most residential wall heights.
3.Is it heavy to hold overhead?
The full assembly weighs 14.55 lb. On the pole that's noticeable after 10–15 minutes of continuous overhead work, which is why the dual batteries let you swap rather than recharge mid-job.
The Bottom Line
The two kits are the same long-reach grinder dressed for different jobs, and choosing between them comes down to the material on your to-do list. Buy the metal kit if you're fighting rust and steel; buy the stone kit if you're working marble or natural stone. When in doubt, start with whichever material you touch most — the other wheels are a low-cost add-on later.
